20 December 2013

Aneka command winfiol untuk troubleshoot dan monitoring

ioexp; (melihat software BSC)
allip:acl=a1; (melihat ext alarm)
rxasp:moty=rxotg; (melihat internal alarm semua site secara detail)
rxasp:moty=rxocf; (melihat internal alarm secara simple)
rxasp:mo=rxotg-84; (melihat internal alarm suatu site secara detail)
rxcdp:mo=rxotg-84; (melihat timeslot suatu site)
rxmop:moty=rxotg; (melihat keseluruhan tg dan nama site)
rxmfp:mo=rxocf-73; (melihat code internal alarm)
rlstp:cell=BR001G3; (melihat status cell halted atau tidak)
alogfind -e 20140502 -g 20140503 -t alp -s GUGLEUR (melihat log alarm, genakan aploc; dulu)

6 comments:

  1. Ok mantap mas....
    Bisa dishare winfiolnya mas?
    Thanks

    ReplyDelete
  2. cara reset site yg ada alarm di 2G ada yang tahu?

    ReplyDelete
    Replies
    1. cabxTechnical Operational Center (TOC)

      #-Cygwin-

      -restr 3g
      acc 0 manualrestart_y_3_6_3 cek al (2,6,0)

      -cek modul
      cab

      Cek 3G under secure crt:
      login oss>fopdudi
      paswword : 2016#mei>enter
      login oss > fopmomon
      Pass : januari*1
      Tulis>amos space site ID>enterit
      tulis>lt all>enter

      cek temperatur & status board
      commend>cabx>enter (normal temp 35c, high temp<40c)
      check cell kalau rx 1 angkanya 0 berarti ngeblock/down coba reset apabila tetap ngeblock suspect module faulty

      cara reset BTS
      comend>restartObj me warm 7\r>enter
      Setelah itu ketik huruf (y)>enter

      acc 0 manualrestart>enter (y)>enter 3>enter 6>enter 3>enter

      ngeliat status bord
      comend>st plug / cell

      lga 1d

      cek traffict
      comend>get radio no (kalau value 0 berarti mati)
      getget
      cek alarm
      Comend>alt (liat total alarm kalu 0 berarti normal)

      -cek 3G & 4g from cygwin

      1. ssh fbss@10.22.224.53
      2. Password : fbss123
      3. moshell space site id
      4. Lt all
      5. get 0 (munculin nama site)
      6. cabx (suhu & vswr)
      7. alt (alarm)
      8. get radio no(traffic 3g)
      9. ue print -admitted(traffic 4g)

      cgifind 2g 2414258

      reset NTP
      lhsh 000100 ntprecover activate





      Reset RRU Sectoral
      1.st ru--Enter
      2.lbl (porxy)--enter
      3.acl (Proxy)
      4.acc (Proxy) restartAuxUnit
      5.cara unlock rru (deb (proxy))

      Liat lock alarm per 1/2 day
      1.lga 1/2d--enter

      cvls-- untuk melihat semua cv
      cvcu-- untuk melihat cv yang star table

      cara melihat link
      1.lst host---enter
      2.get (proxy)--enter
      3.acc host ping---enter
      4.y/n---enter
      5.masukin ip nya

      Cek Alarm :
      SCRT :
      Allip:acl=a1;

      #-SecureCRT- 2G
      ssh fb
      -oss
      amos (site id)

      login wfm

      #pmt321E#
      PMT JB2 HD1

      #Password123
      https://116.66.203.244:17243/wfm/

      BTS INT AFFECTED = sector block
      PERMANENT FAULT = sector block
      BTS INT UNAFFECTE = sector block
      OPERATOR CONDITION
      OML FAUL = down
      LOCAL MODE = sector block

      Login bjkt 30 bjkt 33
      username : ossuser
      password : Ossadmin1@
      ------------------------------------------------------------------------------
      THE SHANNARA CHRONICLES

      User: fopteguh
      Pass
      : juli#2016

      http://10.23.32.109/pm5/
      user : warroom
      pass: warroom*88

      121.52.35.186
      hsgalih
      Password*123

      EMAIL TOC GMAIL BARU

      username : tocxltangerang@gmail.com
      password : toctangerangxl

      acc host ping >y
      get 1405
      cvls
      lst iub
      lst oam

      Liat alarm per bsc
      rxmsp:moty=rxots;
      RXCDP:MO=rxotg-RBLT;
      check Temperature 3g
      Reset
      Produk number
      rxmfp:mo=rxotrx-rblt-trx;
      rxmfp:mo=rxocf-rblt; kalu ada alarm 40,33,58 (vswr)
      =========================
      reset dug
      rxbli:mo=rxotg-xx,subord,force;
      ;
      RXBLE:MO=RXOTG-XX,SUBORD;
      ;
      =========================
      hard reset
      rxbli:mo=rxotg-xx,subord,force;
      RXese:MO=RXOTG-XX,SUBORD;
      RXesi:MO=RXOTG-XX,SUBORD;
      C
      ===============================
      cara reset BTS
      comend>restartObj me warm 7\r>enter
      Setelah itu ketik huruf (y)>enter
      ===============================
      sector block
      RXBLI:MO=RXOTRX-XX-XX,SUBORD,FORCE; BLOCK TRU
      RXBLE:MO=RXOTRX-XX-XX,SUBORD;
      ======================
      RUS/RRU/DUW/DUG : RBS6000
      DRU/DTRU/DXU : RBS2000
      ===================
      login : fopdudi
      PASS : april#2016
      ==================
      cek RBLT
      rxtcp:moty=rxotg,cell=jk26381;
      ==================
      cek SIte Down
      rxasp:moty=rxotg;
      =================
      Cek SIU
      rrsgp:scgr=123;
      rrptp:pstu=siteidul;
      ======================
      USRNAME VPN LOGIN WEB
      username : 03019011

      pmt*2016
      =================
      secore
      secore123
      ==================
      fopteguh
      2016#agustus
      ==================


      Restart : restartObj me cold 3

      Delete